Full-body red light, built for a full day of bookings.
A clamshell red light therapy bed for commercial use. Five wavelengths from 630 to 940 nm cover the whole body front and back at once, in sessions of 10 to 20 minutes. No bulbs to replace, no UV and a running cost of a few cents per session.
*Estimate, subject to credit approval. Price includes delivery, installation and training in the contiguous US; other regions get a freight quote.
The canopy and the bed are both lined with LEDs, so the guest is treated front and back at the same time. No flipping over halfway.
LEDs do not emit UV and are rated for tens of thousands of hours. There are no tanning lamps to replace and no UV regulation to manage.
A 20-minute session uses under 2 kWh of electricity. Your running cost is a rounding error next to a $40–100 session price.
Indicative figures. Your site spec confirms the final power and room requirements before delivery.
| Format | Clamshell full-body bed, guest lies down, front and back treated at once |
|---|---|
| Wavelengths | 630, 660, 810, 850 and 940 nm (red and near-infrared) |
| LED count | ≈ 36,000 LEDs |
| Irradiance | ≈ 100 mW/cm² at the acrylic surface (independent measurement supplied with quote) |
| Modes | Continuous and pulsed, per-wavelength control, session presets |
| Session length | 10–20 minutes |
| Throughput | Up to 3 guests per hour including changeover |
| UV output | None |
| LED lifespan | Rated 50,000+ hours, no bulb replacement |
| Power | 208–240 V single-phase, dedicated 40 A circuit, ≈ 5.5 kW |
| Dimensions | 2.2 × 1.2 m, 1.1 m high (closed) |
| Recommended room | 3.0 × 2.2 m with ventilation or AC for heat output |
| Weight capacity | ≈ 270 kg (600 lb) |
| Controls | Side touchscreen, session presets, usage log |
| Compliance | Electrical listing and regulatory documentation supplied with your written quote |
| Running cost | ≈ $60–120 per month in electricity at typical commercial use |
LED beds draw power only during sessions, so your running cost is the electricity meter. Model your own payback below. Full operating-cost guide →
An estimate, before tax and financing costs. Running cost is the model’s typical monthly electricity use.
A dedicated 208–240 V single-phase circuit on a 40 A breaker. Your electrician gets a spec sheet from us before delivery.
Most sessions run 10 to 20 minutes. With changeover, one bed serves up to about 3 guests an hour.
No. It uses red and near-infrared LEDs only, with no ultraviolet output, so it does not tan and is not a UV tanning device.
People on the waitlist get the first look and launch pricing.
Coming soonA vertical full-body booth for floors where every square metre counts. Under wraps until launch.
Coming soonOur most powerful pod, built for clinics and longevity centres that want the best in the room.
Coming soonA full-body bed sized for a private home gym. Coming soon.
Coming soonA high-output panel for treatment rooms and athletes. Details land at launch.
Coming soon
Share your floor plan and expected bookings. We check fit, power and running costs for your site and reply, typically the next business day.